JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Sealey VSE5909 1.8T Tool Set

Quantity
1
Sealey VSE2358 Locking Kit

For later 1.9 PD engines, and all 2.0 TDi engines.…

Quantity
2
Sealey VSE2356 Locking Kit

For early PD engines fitted with Hydraulic Damper.…

Quantity
3
Sealey VS7006.V2-22 Filter Wrench

Cap type filter wrench specially made for a 93mm filter with 45 flats.

Use with 3/8" drive ratchet.…

Sealey VS5270 Coil On Plug Tester

Quantity
4
Sealey VS024 Windback Tool

Required to retract piston on rear calipers with built in handbrake mechanism.

Has flip over head, with the two…

Quantity
2
Sealey SX150 Haldex Filter Tool

46mm cranked spanner for removal of the Haldex filter fitted to most Quattro and 4-Motion vehicles.

Quantity
1
Sealey SX113 Filter Socket 32mm

Shallow 32mm socket suitable for removing oil filter element cover on vehicles such as 1.4 FSi Polo and many others.…

Quantity
1
Sealey SX0222 Oxygen Sensor Spanner

Suitable for heated and unheated oxygen sensors.
Cut-out section allows socket to pass over wiring.

Socket: 22mm

Sealey SX003 30mm Deep Socket

30mm impact socket suitable for removing front hub nuts on vehicles such as Mk1 and Mk2 Golfs.

1/2" Sq…

Quantity
7
Sealey AK3841 Coil Spring Compressor 2pc

Carbon steel, hardened lead screws and cast jaws.
Wrap over coil claws for extra safety.
Suitable for use where space…

Laser 6799 Top Suspension Mount Tool

Specially designed tool for use when removing the top strut suspension mount where the captive fixing nuts have broken away…

Quantity
1
Laser 6750 Alternator Pulley Tool Set

Kit comprising tools to remove freewheel pulleys from alternators on most European vehicles. Includes both the T50 and M10 bits to…

Quantity
2
Laser 6687 Caliper Hooks (2pc)

Pair of S-hooks designed to support the weight of the caliper whist its removed, to avoid damaging or stressing the…

Quantity
2
Laser 6670 Turbo Spanner 14mm

Designed to allow access to the locking nut on the Turbo Charger Pressure Capsule found on the VAG 2.0 CR…

Quantity
2
Laser 6571 Turbo Actuator Adjustment Set

A specially shaped spanner and split socket designed to assist in the removal, fitting and adjusting of the turbo pressure…

Quantity
1
Laser 5479 PD Injector Spline Bit - M6x75mm

Designed especially for removing the clamping bolt for the injectors used on PD diesel engines. Slim design for restricted access…

Quantity
1
Laser 5092 Head Bolt Set, M10 Ribe

Bit set for cylinder head bolts commonly found on 20v engines.

M10 Ribe Standard
M10 Ribe Fine…

Result Pages:
Part Number Search